• Socomec ATyS (Automatic Load Transfer Switch) Modular 6 Series

    Function The ATyS M, dedicated to applications below 160A, enables the switching On Load of single or three phase source in remote or automatic mode. This Transfer Switching Equipment (TSE) is designed to be used in low voltage power systems for Open Transition Transfer applications. This Transfer Switching Equipment (TSE) is composed of two mechanically and electrically interlocked switches

    Harga : Chat Admin
  • Socomec Automatic Load Transfer Switch 3e Series

    General characteristics

    • Fully visible breaking.
    • On load switching.
    • Manual emergency operation.
    • 3 stable positions (I, 0, II), overlapping contacts on request (I, I+II, II).
    • Padlocking in 0 position (I and II optional).
    • AUTO / MANU selector.
    • Single phase or three phase control on networks I and II (ATyS 6e and 6m).
    • Electrical measurements (ATyS 6e and 6m).
    • Measure of I, P, Q, S and PF (ATyS 6m).
    • Configurable Control Logic.
    • Possibility of inhibition of the electrical control (ATyS 3e).
    • Optional communication and inputs/ outputs modules (ATyS 3e and ATyS 6).

  • Socomec External Front Handle COS COMO C, VM1 & Sircover

    Products for all switching application from 25A to 3200A

    • Applications with 2 interlocked switches Source transfer: manual or automatic switching (ATS) between two sources, either transformer or generating set (fig. 1).

    Earthing of equipment such as motors or electrical lines reserved for signalling, whilst isolating them from their power supply in a fail-safe way (fig.2).

    Inversion of loads: switching of the power supply from one load to another load in order to ensure that they both age at an equal rate (fig. 3).

    Inversion of phases on motors: inversion of the succession of phases supplying a motor in order to modify the direction of rotation (fig. 4).

    • Application with 3 interlocked switches UPS ‘BY-PASS’: isolation then bypassing of a secure UPS type power supply using 3 interlocked breaker switches assembled very close together (fig. 5).

    • Application with 4 interlocked switches Solution ‘ATS BY-PASS’: upstream and downstream disconnection of an ATS function (automatic switching) while guaranteeing the continuity of the distribution via a ’BY-PASS’ branch. Carried out using a single operating handle, this operation allows the ATS function to be separated for maintenance, in complete safety.

    Linked to a switching function, the bypass branch means it is still possible to select the sources in the event of a failure of one of them (fig. 6).

  • Socomec Fuse Base / Holder

    Female to female hexagonal insulator
    – Current rating Up to 63 A
    – Polyester free of halogen
    – Self extinguishability UL94VO
    – Color red RAL 3002
    – IEC 60439-1, IEC 60865-1
    – Approvals and certifications : KEMA, ASEFA / LCIE

  • Socomec Fuse Combination Switches 3P 160A – 400A Front External

    FUSERBLOC UL fusible disconnect switches are heavy duty switches that break and make power circuits on and off load.
    The switches employ double break contacts per pole that ensure complete isolation of the fuse when the switch is in the “OFF” position. These switches are extremely durable and are tested and approved for use in the most demanding applications.
    The TEST position function is enabled with handles with the TEST position. This function tests the control circuit auxiliaries without switching the main contacts. It is a simple alternative to a separately wired push button.

    Advantages

    Improved safety

    • On load make and break power circuit applications.
    • Double break by phase.
    • Touch safe covers.

    High breaking capacity

    • Up to 200 kA Short circuit rating.

    A complet range of functions

    • Compact footprints.
    • Front or side operation.
    • Flange operation.
    • NFPA 79 compliant kits.
    • Voltage sensing terminals.

  • Socomec Fuse Combination Switches 3P 160A – 400A Side

    FUSERBLOC UL fusible disconnect switches are heavy duty switches that break and make power circuits on and off load.
    The switches employ double break contacts per pole that ensure complete isolation of the fuse when the switch is in the “OFF” position. These switches are extremely durable and are tested and approved for use in the most demanding applications.
    The TEST position function is enabled with handles with the TEST position. This function tests the control circuit auxiliaries without switching the main contacts. It is a simple alternative to a separately wired push button.

    Advantages

    Improved safety

    • On load make and break power circuit applications.
    • Double break by phase.
    • Touch safe covers.

    High breaking capacity

    • Up to 200 kA Short circuit rating.

    A complet range of functions

    • Compact footprints.
    • Front or side operation.
    • Flange operation.
    • NFPA 79 compliant kits.
    • Voltage sensing terminals.

  • Socomec Fuse Combination Switches 3P 32A – 125A Front & Front External

    Despite already offering a wide range of fuse combination switches, SOCOMEC also manufactures specific products suitable for all your requirements and dedicated to specific applications.

    • Multipolar FUSERBLOC
    • Central mechanism FUSERBLOC
    • Fused changeover switches
    • FUSERBLOC rear connection
    • Plug-in FUSERBLOC
    • FUSERBLOC LMDC

     

  • Socomec Fuse Combination Switches 3P 32A – 125A Front & Side

    Despite already offering a wide range of fuse combination switches, SOCOMEC also manufactures specific products suitable for all your requirements and dedicated to specific applications.

    • Multipolar FUSERBLOC
    • Central mechanism FUSERBLOC
    • Fused changeover switches
    • FUSERBLOC rear connection
    • Plug-in FUSERBLOC
    • FUSERBLOC LMDC

     

  • Socomec Fuse Combination Switches 3P 630A – 1250A Front

    FUSERBLOC UL fusible disconnect switches are heavy duty switches that break and make power circuits on and off load.
    The switches employ double break contacts per pole that ensure complete isolation of the fuse when the switch is in the “OFF” position. These switches are extremely durable and are tested and approved for use in the most demanding applications.
    The TEST position function is enabled with handles with the TEST position. This function tests the control circuit auxiliaries without switching the main contacts. It is a simple alternative to a separately wired push button.

    Advantages

    Improved safety

    • On load make and break power circuit applications.
    • Double break by phase.
    • Touch safe covers.

    High breaking capacity

    • Up to 200 kA Short circuit rating.

  • Socomec Fuse Combination Switches 3P 630A – 1250A Front External

    FUSERBLOC UL fusible disconnect switches are heavy duty switches that break and make power circuits on and off load.
    The switches employ double break contacts per pole that ensure complete isolation of the fuse when the switch is in the “OFF” position. These switches are extremely durable and are tested and approved for use in the most demanding applications.
    The TEST position function is enabled with handles with the TEST position. This function tests the control circuit auxiliaries without switching the main contacts. It is a simple alternative to a separately wired push button.

    Advantages

    Improved safety

    • On load make and break power circuit applications.
    • Double break by phase.
    • Touch safe covers.

    High breaking capacity

    • Up to 200 kA Short circuit rating.

  • Socomec Fuse Combination Switches 4P 160A – 400A Front External

    FUSERBLOC UL fusible disconnect switches are heavy duty switches that break and make power circuits on and off load.
    The switches employ double break contacts per pole that ensure complete isolation of the fuse when the switch is in the “OFF” position. These switches are extremely durable and are tested and approved for use in the most demanding applications.
    The TEST position function is enabled with handles with the TEST position. This function tests the control circuit auxiliaries without switching the main contacts. It is a simple alternative to a separately wired push button.

    Advantages

    Improved safety

    • On load make and break power circuit applications.
    • Double break by phase.
    • Touch safe covers.

    High breaking capacity

    • Up to 200 kA Short circuit rating.

    A complet range of functions

    • Compact footprints.
    • Front or side operation.
    • Flange operation.
    • NFPA 79 compliant kits.
    • Voltage sensing terminals.

  • Socomec Fuse Combination Switches 4P 160A – 400A Side

    FUSERBLOC UL fusible disconnect switches are heavy duty switches that break and make power circuits on and off load.
    The switches employ double break contacts per pole that ensure complete isolation of the fuse when the switch is in the “OFF” position. These switches are extremely durable and are tested and approved for use in the most demanding applications.
    The TEST position function is enabled with handles with the TEST position. This function tests the control circuit auxiliaries without switching the main contacts. It is a simple alternative to a separately wired push button.

    Advantages

    Improved safety

    • On load make and break power circuit applications.
    • Double break by phase.
    • Touch safe covers.

    High breaking capacity

    • Up to 200 kA Short circuit rating.

    A complet range of functions

    • Compact footprints.
    • Front or side operation.
    • Flange operation.
    • NFPA 79 compliant kits.
    • Voltage sensing terminals.

Main Menu