-
Socomec ATyS (Automatic Load Transfer Switch) Modular
Function The ATyS M, dedicated to applications below 160A, enables the switching On Load of single or three phase source in remote or automatic mode. This Transfer Switching Equipment (TSE) is designed to be used in low voltage power systems for Open Transition Transfer applications. This Transfer Switching Equipment (TSE) is composed of two mechanically and electrically interlocked switches
Harga : Chat Admin -
Socomec ATyS (Automatic Load Transfer Switch) Modular 6 Series
Function The ATyS M, dedicated to applications below 160A, enables the switching On Load of single or three phase source in remote or automatic mode. This Transfer Switching Equipment (TSE) is designed to be used in low voltage power systems for Open Transition Transfer applications. This Transfer Switching Equipment (TSE) is composed of two mechanically and electrically interlocked switches
Harga : Chat Admin -
Socomec ATyS ATS Universal Controller
ATyS C20 / C30 / C40 allows any type of motorized changeover control: ATyS and ATyS M, contactors, circuit breakers or other motorised switches.
Conformity to standards
IEC 61010-1
IEC 61000-4-2
etc.Harga : Chat Admin -
Socomec Automatic Load Transfer Switch 3e Series
General characteristics
• Fully visible breaking.
• On load switching.
• Manual emergency operation.
• 3 stable positions (I, 0, II), overlapping contacts on request (I, I+II, II).
• Padlocking in 0 position (I and II optional).
• AUTO / MANU selector.
• Single phase or three phase control on networks I and II (ATyS 6e and 6m).
• Electrical measurements (ATyS 6e and 6m).
• Measure of I, P, Q, S and PF (ATyS 6m).
• Configurable Control Logic.
• Possibility of inhibition of the electrical control (ATyS 3e).
• Optional communication and inputs/ outputs modules (ATyS 3e and ATyS 6). -
Socomec Automatic Load Transfer Switch 3s Series
General characteristics
• Fully visible breaking.
• On load switching.
• Manual emergency operation.
• 3 stable positions (I, 0, II), overlapping contacts on request (I, I+II, II).
• Padlocking in 0 position (I and II optional).
• AUTO / MANU selector.
• Single phase or three phase control on networks I and II (ATyS 6e and 6m).
• Electrical measurements (ATyS 6e and 6m).
• Measure of I, P, Q, S and PF (ATyS 6m).
• Configurable Control Logic.
• Possibility of inhibition of the electrical control (ATyS 3e).
• Optional communication and inputs/ outputs modules (ATyS 3e and ATyS 6).Rp 8.800.000 – Rp 56.000.000Socomec Automatic Load Transfer Switch 3s Series
Rp 8.800.000 – Rp 56.000.000 -
Socomec Automatic Load Transfer Switch 6e Series
General characteristics
• Fully visible breaking.
• On load switching.
• Manual emergency operation.
• 3 stable positions (I, 0, II), overlapping contacts on request (I, I+II, II).
• Padlocking in 0 position (I and II optional).
• AUTO / MANU selector.
• Single phase or three phase control on networks I and II (ATyS 6e and 6m).
• Electrical measurements (ATyS 6e and 6m).
• Measure of I, P, Q, S and PF (ATyS 6m).
• Configurable Control Logic.
• Possibility of inhibition of the electrical control (ATyS 3e).
• Optional communication and inputs/ outputs modules (ATyS 3e and ATyS 6). -
Socomec Automatic Load Transfer Switch 6m Series
General characteristics
• Fully visible breaking.
• On load switching.
• Manual emergency operation.
• 3 stable positions (I, 0, II), overlapping contacts on request (I, I+II, II).
• Padlocking in 0 position (I and II optional).
• AUTO / MANU selector.
• Single phase or three phase control on networks I and II (ATyS 6e and 6m).
• Electrical measurements (ATyS 6e and 6m).
• Measure of I, P, Q, S and PF (ATyS 6m).
• Configurable Control Logic.
• Possibility of inhibition of the electrical control (ATyS 3e).
• Optional communication and inputs/ outputs modules (ATyS 3e and ATyS 6). -
Socomec BAR Through TBA 103
( Max. Bar = 103 x 41 mm )
Other products
– Accuracy class: 0,2 S.
– 1 A secondary.
– Frequency 400 Hz.
– Double or triple primary ratio.
– Summation.
– Voltage transformer.Conformity to standards
– IEC 185 (IEC 44-1)
– VDE 0414 -
Socomec BAR Through TBA 127
( Max. Bar = 128 x 38 mm )
Other products
– Accuracy class: 0,2 S.
– 1 A secondary.
– Frequency 400 Hz.
– Double or triple primary ratio.
– Summation.
– Voltage transformer.Conformity to standards
– IEC 185 (IEC 44-1)
– VDE 0414 -
Socomec BAR Through TBA 60
( Max. Bar = 31 x 60 mm )
Other products
– Accuracy class: 0,2 S.
– 1 A secondary.
– Frequency 400 Hz.
– Double or triple primary ratio.
– Summation.
– Voltage transformer.Conformity to standards
– IEC 185 (IEC 44-1)
– VDE 0414 -
Socomec Busbar Support System and Fuse Base Holder Multipolar
● Made of Polyamide – Glass fibre reinforced polyester.
● High Dielectric and mechanical withstand.
● Great resistance to damp – heat (original tropicallized).
● Conformity to IEC 439-1, NFC 63410, VDE 0100-520, BS 5486-1.
● Edgewise mounting (either for vertical or horizontal busbar system), or flat mounting -
Socomec Busbar Support System and Fuse Base Holder Unipolar
EDGEWISE MOUNTING
● Made of Polyamide – Glass fibre reinforced polyester.
● High Dielectric and mechanical withstand.
● Great resistance to damp – heat (original tropicallized).
● Conformity to IEC 439-1, NFC 63410, VDE 0100-520, BS 5486-1.
● Edgewise mounting (either for vertical or horizontal busbar system), or flat mounting.